UNDERGROUND STORAGE TANKS

Our own design and patented underground tank system is constructed using a combination of steel and prestressed panels with all joints sealed using an approved sealant.

The system is a quick and cost effective way to construct an underground tank. It is a tried and tested system and can be installed successfully by any competent farmer or contractor.

The Underground storage tanks can either be left open as a lagoon, covered with slats or if a suspended floor covered with slats, cubicles and passage covers.

We are able to supply underground tanks in any size and various depths up to 2.4m (8’) deep. The tanks system is structurally certified and approved by the statutory environment agencies.

They are suitable for the storage of slurry, sewage or water.

  

INSTALLATION PROCEDURE

Site Preparation
The pit is excavated, levelled and layered with hardcore.
Structural Steel Framework
Steel framework is installed and the bottom steel work is set on a concrete pad.
Concrete Wall Panels
The concrete panels are then lowered into position between uprights using a telehandler.
Insitu Concrete Floor
The concrete floor is poured insitu to entire tank to give a minimum cover to base steel work. 
Mesh reinforcement is installed locally over steel framework.
Sealant
All joints are sealed using an approved sealant as directed by manufacturer.
Finishing
To finish off, the steel uprights are encased on the inside using the moulds supplied.
System Certification
The system has a structural engineer's certificate and is supplied with full installation details.
Tel: 01292 541218      Fax: 01292 540120     
M J Harrison Supplies Ltd, Scoutts Farm, Tarbolton, Mauchline, Ayrshire KA5 5NQ
Website Produced by The Internet Design Co