BUNKER WALLS

The free standing concrete bunker wall was designed to minimise the hassle in the storage of bulk materials with many applications from grain, silage, woodchip for biomass, recycling materials, coal, sand and aggregate, etc. They are available in a variety of heights and have forklift recesses which allows you to configure and adjust bay sizes quickly and easily and are shaped to allow free flow of material to the bottom with a square bottom edge to aid removal of the material being stored

null
MORE INFORMATION

(Adobe PDF Document)

Features & benefits of the Bunker Walls include:

  • null
    Quick and safe installation and re-positioning using the forklift recesses.
  • null
    Double load bearing as standard.
  • null
    Do not need to be bolted down when retaining material which has a density of less than 12kn/m3. This includes grain, solid fuels, recycling materials, potatoes, etc.
  • null
    Owing to the design can be loaded on one side and will not move (where fixing down is not required).
  • null
    Shaped to allow free flow of material to the bottom with a square bottom edge to aid removal of the material being stored.
Bunker Walls for Bulk Storage of Animal Feed, Biomass Products, Gravel and other Bulk Materials
Bunker Walls used to make a temporary storage area in Fife, Scotland
2.4m Free Standing Concrete Retainer Walls to Create a Storage Bay
2.4m Storage Bays Walls from MJ Harrison Supplies, Ayrshire, Scotland

Features & benefits of the Bunker Walls include:

  • null
    Are available in a range of heights from 1.5m (5’) to 4.3m (14’) (see table below) and standard width of 1.2m (4’).
  • null
    Corner units are available to form ‘L’ or ‘T’ shaped bays.
  • null
    Heavier profile wall is available to retain silage, either 2.4m (8’) or 3.0m (10’) high. These will need to be bolted down to a suitably reinforced base.
  • null
    Have a square end so can be easily butted together thus saving valuable installation time.
  • null
    Have a narrow base, thus minimising its footprint.
  • null
    Manufactured to a very high standard resulting in a smooth finish.

Table of Sizes

Height Width Base Weight
1500mm (5’) 1200mm 710mm 1211kg
2400mm (8’) * 1200mm 960mm 2065kg
3000mm (10’) * 1200mm 1130mm 2790kg
3600mm (12’) 1200mm 1130mm 3017kg
4000mm (13’) 1200mm 1130mm 3550kg
4300mm (14’) 1200mm 1130mm 3675kg

*Heavier profile wall available for silage loading

Bunker Retainer Walls for a Range Bulk Storage Needs - Scotland
Bulk Storage Using Bunker Retainer Walls from MJ Harrison Supplies
3.6m (12') high Bunker Retainer Walls used to construct storage bays for waste materials in Ayrshire, Scotland 2
3.6m (12') high Bunker Retainer Walls used to construct storage bays for waste materials in Ayrshire, Scotland

Additional Information

The bunker walls are CE Marked and manufactured to EN 15258.  Full specification is available within Moore Concrete’s Declaration of Performance for Precast Concrete Retaining Walls.

For installation and handing guidance on the Bunker Walls, please refer to Storage and Handling Instructions